SENSORTRONICS 65016-TWA Tank Weighing Assembly, Zinc-Plated Cast Steel, Load Cell Not Included (1K~75K lb)

The 65016-TWA is a mid to high capacity nickel plated alloy steel weighing assembly.
This product is the standard in tank and container weighing due to the Zone 4 earthquake rating. It has high side load rejection, and is able to withstand loads in all directions up to and exceeding its rated capacity without permanent damage or the threat of structural failure. This weighing assembly is also designed to move in the direction of thermal expansion, guaranteeing accurate measurements regardless of conditions. Nickel plating and IP67 rated sealing make this load cell suitable for use in outdoor applications as well as applications that are subject to high pressure wash down. For a higher degree of corrosion and water resistance please see 65016-0104W, the stainless steel and welded seal version of 65016.
This load cell is rated intrinsically safe by the Factory Mutual System (FM); making it suitable for use in potentially explosive environments

STANDARD FEATURES:

• Capacities (lb): 1K/ 1.5K/ 2.5K/ 5K/ 10K/ 15K/ 25K/ 35K/ 50K/ 75K
• Mounts directly to the floor or structural support
• Self-checking with provisions for thermal expansion and contraction
• Insensitive to side loads and bending moments
• High output - well suited to high deadload/low liveload applications
• Load cells have matched outputs for multi-cell systems
• Excellent combined error and repeatability
• Accuracies exceed 0.1% with agitated loads
• Integral conduit adaptor
• Certified for uniform building code seismic zones 1 thru 4
• Sensorgage™ sealed to IP67 standards
• Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G.
• Also, non-incendive ratings (No barriers!)